Gearing A 13.5 brushless/1s lipo

Go down

Gearing A 13.5 brushless/1s lipo

Post  dogpinkscot on Thu Dec 17, 2009 11:41 pm

hi all just thought i would start this thread as it will benefit us all when we all progress onto this system 48dp seems the way forward

Posts : 1
Points : 3
Join date : 2009-12-09
Age : 47

Back to top Go down

Re: Gearing A 13.5 brushless/1s lipo

Post  Gazza on Fri Dec 18, 2009 12:00 am

Hi Justin

Good question

Well I started of on a 78Spur 48dp and MY motor ran a little slower and the a bit HOT. . .
I then played around with the gears and now My motor now runs a 73/25 for Mercc and a 73/26 for Hinckley and the motor is just a little warm and I mean a little warm

This is with the Mardave Diff but this Saturday I plan to use the Mardave 32dp Gears ( NO DIFF ) and I plan to start off with a 50 spur and 17 pinion or start with a 12 pinion and go from there
hope that helps


Posts : 63
Points : 158
Join date : 2009-12-05
Age : 59

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum