Gearing A 13.5 brushless/1s lipo
2 posters
Page 1 of 1
Gearing A 13.5 brushless/1s lipo
hi all just thought i would start this thread as it will benefit us all when we all progress onto this system 48dp seems the way forward
dogpinkscot- Posts : 1
Points : 3
Join date : 2009-12-09
Age : 53
Re: Gearing A 13.5 brushless/1s lipo
Hi Justin
Good question
Well I started of on a 78Spur 48dp and MY motor ran a little slower and the a bit HOT. . .
I then played around with the gears and now My motor now runs a 73/25 for Mercc and a 73/26 for Hinckley and the motor is just a little warm and I mean a little warm
This is with the Mardave Diff but this Saturday I plan to use the Mardave 32dp Gears ( NO DIFF ) and I plan to start off with a 50 spur and 17 pinion or start with a 12 pinion and go from there
hope that helps
Gazza
Good question
Well I started of on a 78Spur 48dp and MY motor ran a little slower and the a bit HOT. . .
I then played around with the gears and now My motor now runs a 73/25 for Mercc and a 73/26 for Hinckley and the motor is just a little warm and I mean a little warm
This is with the Mardave Diff but this Saturday I plan to use the Mardave 32dp Gears ( NO DIFF ) and I plan to start off with a 50 spur and 17 pinion or start with a 12 pinion and go from there
hope that helps
Gazza
Gazza- Posts : 63
Points : 158
Join date : 2009-12-05
Age : 64
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|