BRUSHLESS SPEED CONTROLS/MOTORS SUITABLE FOR MARDAVE

View previous topic View next topic Go down

BRUSHLESS SPEED CONTROLS/MOTORS SUITABLE FOR MARDAVE

Post  Wacker1 on Sat Dec 19, 2009 6:15 am

Hi all,

I know that Gazza has already mentioned the LRP A.I. Reverse/13.5T Eraser Combo, in another Thread.......& the Equivalent System from Nosram : Evil Reverse/13.5T Dragon.

But, while I was Shopping Online Today, I noticed a couple of New Speed Controls available, that may be perfect for the Mardave Class.

There are 2 Versions of it & here they are :

ROBITRONIC SPEEDSTAR BRUSHLESS SPEEDO 8.5 - RRP £64.99 - WEB PRICE £49.99


FEATURES:
For brushed, brushless, sensored and sensorless motors
Smooth throttle response characteristics
Reverse can be disabled for racing
LiPo, LiFe, NiCd & NiMh compatable
Adjustable power curves
Adjustable motor timing
Low voltage cut off protection

SPECIFICATION:
Brushless speed controller for rc car 8.5 Turn brushless motor limit. 7 Turn brushed.
Motor type - Brushless & Brushed
Input voltage - NiCd & NiMh 4-8 cell, Lipo, LiFe -2-3 cells
Will run sensored and sensorless motors
Fwd, Brk,Reverse
BEC (5V, 3.0A)
On Resistance (brushless) 0.00065 ohm/phase
Rated current (brushless) 260A/phase
Over temperature protection
Low voltage cut off protection
Dimensions (mm) - 40 x 41 x 28.7
Weight without cables - 43g
It has a similar Style & Spec to the LRP A.I. Reverse & Nosram Evil Reverse
ROBITRONIC SPEEDSTAR BRUSHLESS 5.5 - RRP £89.99 - WEB PRICE £69.99
FEATURES:
For brushed, brushless, sensored and sensorless motors
Smooth throttle response characteristics
Reverse can be disabled for racing
LiPo, LiFe, NiCd & NiMh compatable
Selecetable start current and current limit (3.5 & 5.5 only)
Adjustable power curves
Adjustable motor timing
Low voltage cut off protection
Overcurrent protection (3.5 & 5.5)

SPECIFICATION:
Brushless speed controller for rc car 5.5 Turn brushless motor limit. 6 Turn brushed.
Motor type - Brushless & Brushed
Input voltage - NiCd & NiMh 4-6 cell, Lipo, LiFe -2 cells
Will run sensored and sensorless motors
Fwd, Brk,Reverse
BEC (6V, 3.0A)
On Resistance (brushless) 0.00065 ohm/phase
Rated current (brushless) 382A/phase
Over temperature protection
Low voltage cut off protection
Overcurrent protection
Dimensions (mm) - 34 x 38 x 30.5
Weight without cables - 50
From the Design of the Case, it looks very similar to the LRP Sphere/Nosram Matrix

avatar
Wacker1

Posts : 7
Points : 23
Join date : 2009-12-18
Age : 41

Back to top Go down

Re: BRUSHLESS SPEED CONTROLS/MOTORS SUITABLE FOR MARDAVE

Post  Gazza on Sat Dec 19, 2009 6:41 am

Look Here <<<<<<< Click link
avatar
Gazza

Posts : 63
Points : 158
Join date : 2009-12-05
Age : 58

Back to top Go down

Re: BRUSHLESS SPEED CONTROLS/MOTORS SUITABLE FOR MARDAVE

Post  Wacker1 on Sat Dec 19, 2009 7:19 am

As far as 13.5T Brushless Motors are concerned, theres quite a Range available!

The most Reasonable Priced Motors are the LRP Eraser, Nosram Dragon, Losi Xcelorin, Speed Passion SPF135 & Hacker E40.......saying that though, you can probably find some Deals around in the Shops, on the Older slightly more Expensive Models that have just been Replaced.i.e LRP X11, Nosram Storm Evolution & Novak SS Pro.

If your after the very latest in Brushless Technology, these are the best of the Bunch! :

NOSRAM PURE EVOLUTION - £77


GM PRO STAR WIND - £63


NOVAK BALLISTIC - £85


LRP X12 STOCK SPEC - £80


SPEED PASSION V3.0 - £70


PHOTOS ARE FOR ILLUSTRATION PURPOSES ONLY(some may not say 13.5 or have the Orange Ring on them)

There ALL very similar on Performance, so its just down to personal taste!
avatar
Wacker1

Posts : 7
Points : 23
Join date : 2009-12-18
Age : 41

Back to top Go down

Re: BRUSHLESS SPEED CONTROLS/MOTORS SUITABLE FOR MARDAVE

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum